https://www.mccoys.com/shop/p/12120234/simpson-strong-tie-titen-hd-series-thd50800h-screw-anchor-12-in-dia-8-in-l-carbon-steel-zinc
Titen HD Series THD50800H Screw Anchor, 1/2 in Dia, 8 in L, Carbon Steel, Zinc
Sku: 12120234
$5.69
74 Available at
San Marcos
Location:
Aisle 4
Bolt Anchor Options:THD50800H Screw 1/2inx8inL
The original high-strength screw anchor for use in cracked and uncracked concrete, as well as uncracked masonry. The Titan HD® offers low installation torque and outstanding performance. Designed and tested in dry, interior, non-corrosive environments or temporary outdoor applications, the Titan HD® demonstrates industry leading performance even in seismic conditions. The stainless-steel Titan HD® is the optimal choice for applications in corrosive or extreme environments such as salt water or when chemical or corrosive solutions are present.
- Qualified for static and seismic loading conditions
- Thread design undercuts to efficiently transfer the load to the base material
- Specialized heat-treating process creates tip hardness for better cutting without compromising the ductility
- No special drill bit required, designed to install using standard-sized ANSI tolerance drill bits
- Testing shows the Titen HD® installs in concrete with 50% less torque than competitor anchors
- Hex-washer head requires no separate washer, unless required by code and provides a clean installed appearance
Diameter
1/2
Length
8
Drill Size
1/2
Head Type
Hex
Tensile Strength
110000
Minimum Clearance
5/8
Fixture Thickness
5/8 to 11/16
Minimum Concrete Thickness
5 to 6-1/4
Material
Carbon Steel
Finish
Zinc
Similar Items
Add To Cart Error
There was an error saving the item to the cart. Please try again.
Add To Cart Error
There was an error saving the item to the cart. Please try again.