https://www.mccoys.com/shop/p/28532024/hillman-883551-shaft-collar-18-in-dia-bore-38-in-od-zinc-plated
883551 Shaft Collar, 1/8 in Dia Bore, 3/8 in OD, Zinc-Plated
Sku: 28532024
$4.73
3 Available at
San Marcos
Location:
Aisle 2
Shaft Collars:Hillman 883551 1/8in
Shaft collars are commonly used as mechanical stops, locating components and/or bearing faces within mechanical systems. They are easy to adjust with set screws. Shaft collars create a tight fit and greater holding power without the damage normally caused by set screws alone. To install, simply slide these collars on to a shaft and tighten the set screw to hold the collar in place.
- Effective on both hard and soft material shafts
- Easily installed where major assembly/disassembly would otherwise be required
- Zinc-plated for improved corrosion resistance
- Part of the Hillman deep drawer program
Bore Diameter
1/8
Outside Diameter
3/8
Finish
Zinc-Plated
Similar Items
Add To Cart Error
There was an error saving the item to the cart. Please try again.
Add To Cart Error
There was an error saving the item to the cart. Please try again.